SureCall | 48346 Milmont Dirve, Fremont CA 94538 | 1-888-365-6283 | [email protected]
7
Step 1. Make sure you have positioned the booster close enough to an existing
electrical outlet.
Step 2. Make sure you have sufficient cable length between proposed outside antenna
location and booster connector.
Step 3 Make sure you have sufficient cable length between proposed inside antenna
location and booster connector.
Installation Overview
Step 1. Find the outside area that has the strongest signal.
(See page 8 for instruction)
Step 2. Install the outside antenna in the area identified in step 1.
(See page 9-11 for instruction)
Step 3. Install the inside antenna.
(See page 11-12 for instruction)
Step 4. Mount the signal booster, connect the outside and inside antenna cables to the signal
booster, and connect the booster to an AC power source. (
See page 13-14 for instruction)
Step 5. Configure gain settings on the signal booster if needed.
(See page 14 for instruction)
Before You Install
Outside Antenna
Signal Booster
Inside Antenna
