13
Addresses Containing Hexadecimal Data
Zone Lights 5 to 8 are used to indicate the data presently programmed at the Address. One digit is shown at a
time, beginning with the first digit. To review all digits, use the “[0] and [#]” and the “[
∗
] and [0]” commands to
scroll right and left.
Data Representation
The hexadecimal numbers 0 through F are represented on the Zone Lights in a binary format, as shown below:
0
1
2
3
4
5
6
7
8
9
A
B
C
D
E
F
5
6
7
8
Zone Light:
= Light ON
= Light OFF
For example, if only Zone Light 8 is ON, the digit represented is “1”. If zone Light 7 is ON, the digit represented
is “2”.
“Light ON / Light OFF” Addresses
Some Addresses allow options and functions to be enabled or disabled by turning Zone Lights ON and
OFF. When an Address of this type is entered, Zone Lights 1 to 8 will indicate which options have been
enabled or disabled.
Generally, when a Zone Light is ON, that feature is enabled; when a Zone Light is OFF, that feature is disabled.
To turn a feature on or off, enter a number from 1 to 8. If the feature was
disabled when the number was
entered, it will be
enabled and the Zone Light will come ON. If the feature was enabled when the number is
entered, it will be
disabled and the Zone Light will be turned OFF.
To turn all of the lights ON, press [4] and [6] together.
To turn all of the lights OFF, press [7] and [9] together.
PROGRAMMING SECTIONS
firealarmresources.com
firealarmresources.com
