SUPREME OXYLINE, Руководство по установке

Страница: 3 / 15

- Before you begin the installation of the appliance,
we advise you read and carefully follow the instructions
contained in this manual. It contains important
information about safety, installation, use and
maintenance of the product. The actual system that you
have received, may differ from the pictures
, illustrations ,
descriptions in these Instructions.
- Failure to follow the instructions could cause personal
injury or damage to the appliance or property. Only when
installed, commissioned and serviced correctly, the
appliance will offer you many years of trouble-free
operation.
- The appliance is intended to 'filter' the water, meaning
it will remove specific undesired substances; it will not
necessarily remove other contaminants present in the
water. The appliance will not purify polluted water
or make it safe to drink!
- Installation of the appliance should only be undertaken
by a competent person, aware of the local codes in force.
All plumbing and electrical connections must be done
in accordance with local codes.
OPERATING PRESSURE MIN-MAX: 2,5 - 8,6 bar / 36-125 psi
- this appliance is configured to perform optimally at an operating pressure of 3 bar (45 psi) ± 1/2 bar (7 psi);
in case of a lower or higher operating pressure the performance may be affected negatively!
- check water pressure regularly.
- take into account that night time water pressure may be considerably higher than day time water pressure.
- install a pressure reducer ahead of the appliance if necessary.
- Before setting up the appliance, make sure to check
it for any externally visible damage; do not install or use
when damaged.
- Use a hand truck to transport the appliance. To prevent
accident or injury, do not hoist the appliance over your
shoulder. Do not lay the appliance on its side.
- Keep these Instructions in a safe place and ensure that
new users are familiar with the content.
- The appliance is designed and manufactured
in accordance with current safety requirements
and regulations. Incorrect repairs can result in unforeseen
danger for the user, for which the manufacturer cannot
b e held responsible. Therefore repairs should only
be undertaken by a competent technician, familiar and
trained for this product.
- The appliance must be serviced at least once a year (this
service may be payable). The service must be done by a
qualified company. In order to perform the services,
please contact the distributor from whom you purchased
your appliance.
- In respect of the environment, the appliance should
be disposed of in accordance with Waste Electrical and
Electronic Equipment requirements. Refer to national
,
local laws and codes for correct recycling of the appliance.
IMPORTANT INFORMATION
OPERATING CONDITIONS AND REQUIREMENTS
pH to remove iron
Parameter
OXYLINE OXYLINE PLUS
pH to remove iron and manganese
2+ *
Max. level of iron (Fe )
2+ *
Max. level of manganese (Mn )
*
Organic compounds
*
Chlorine
*
Max. level of hydrogen sulphide (H S)
2
pH to remove manganese
Limits of application:
3
6,8 - 9,0
8,0 - 9,0
8,0 – 8,5
up to 15 mg/l up to 70 mg/l
up to 35 mg/l
up to 15 mg/l
0 mg/l
- mg/l
up to 2 mg/l
up to 5 mg/l
up to 2 mg/l
up to 5 mg/l
5,8 – 10,0
5,8 – 10,0
5,8 – 10,0
* the values presented in the table are developed based on the MSDS from the producers of filter beds and depend on other physical and chemical
parameters of water.
We strongly recommend to have the appliance selected by a qualified water technologist.