6
3.2 Keypad Operation
If there is not any keypad operation in one minute and it
’
s not in the processes of
‘F2 System Calibration’ & ‘F6
Factory Adjustment’
, the controller will return to
‘
Main Display Interface
’
automatically.
*: Keep the key pressed for 2 seconds.
Menu Operation
Key Name
Description
【■】
Enter Main Menu / Exit.
【
】
Enter / Save / Alarm Acknowledge.
【
►
】
Cursor shifts right.
Display the previous option.
【
▲
】
Display the next interface or option.
Digit input: +1 ( 0~9 loop).
Quick Operation Mode A
Parameter [904]=
‘
0. dE
’
[Default Set]
Key Name
Description
【■】
*
Key-locking.
Key-unlocking.
【
►
】
(
【
SET
】
)
Setpoint parameters setting.
【
►
】
*
(
【
ZERO
】
)
(
【
→
0
←
】
)
[-ZEro]: Zero Calibration with Power-down Protection and Clearing Tare Weight.
[≡ZEro]
: Zero Fine Adjustment without Power-down Protection and without Clearing
Tare Weight.
The controller will switch to Gross Weight display.
【
▲
】
*
(
【
TARE
】
)
(
【
→
T
←
】
)
[≡tArE]: Manual Tare without Power
-down Protection.
[-PStr]: Preset Tare Weight with Power-down Protection.
[-rStr]: Clear Tare Weight with Power-down Protection.
The controller will switch to Net Weight display.
【
】
(
【
G/N
】
)
Gross Weight / Net Weight / Net Weight Peak Value display switch.
【
】
*
(
【
CLS
】
)
[-CLS] : Clear Screen [Clear the display value of Peak Value].
