Supero X7DVL-E, Руководство пользователя

Страница: 68 / 99

4-12
X7DVL-E User's Manual
Crystal Beach Features
This feature cooperates with Intel I/O AT (Acceleration Technology) to accelerate
the performance of TOE devices. (*Note: A TOE device is a specialized, dedicated
processor that is installed on an add-on card or a network card to handle some or all
packet processing of this add-on card. For this motherboard, the TOE device is built
inside the ESB 2 South Bridge chip.) The options are Enabled and Disabled.
Route Port 80h Cycles to
This feature allows the user to decide which bus to send debug information to. The
options are Disabled, PCI and LPC .
Clock Spectrum Feature
If Enabled, the BIOS will monitor the level of Electromagnetic Interference caused
by the components and will attempt to decrease the interference whenever needed.
The options are Enabled and Disabled .
High Precision Event Time
Select Yes to activate the High Precision Event Timer (HPET), which is capable
of producing periodic interrupts at a much higher frequency than a Real-time
Clock (RTC) can in synchronizing multimedia streams, providing smooth playback
and reducing the dependency on other timestamp calculation devices, such as
an x86 RDTSC Instruction embedded in a CPU. The High Precision Event Timer
is used to replace the 8254 Programmable Interval Timer. The options for this
feature are Yes and No .
USB Function
Select Enabled to enable the function of USB devices specifi ed. The settings are
Enabled and Disabled.
Legacy USB Support
Select Enabled to enable Legacy USB device support. The settings are Enabled
and Disabled.

Advanced Processor Options
Access the submenu to make changes to the following settings.
CPU Speed
This display indicates the speed of the processor installed on the motherboard.
Frequency Ratio (Available when supported by the CPU)
The feature allows the user to set the internal frequency multiplier for the CPU.
The options are: Default, x12, x13, x14, x15, x16, x17 and x18.