Supero X7DVL-E, Руководство пользователя

Страница: 65 / 99

Chapter 4: BIOS
4-9

PCI Confi guration
Access the submenu to make changes to the following settings for PCI devices.
Onboard GLAN1/Onboard GLAN2 (Gigabit- LAN) OPROM Confi gure
Enabling this option provides the capability to boot from GLAN Port 1/Port 2. The
options are Disabled and Enabled.
Primary Video Adapter
This setting allows you to select the primary video display device at bootup. Select
Onboard to use the onboard video device as your primary display device at bootup.
The options are Other and Onboard .
Emulated IRQ Solution
All PCI-E devices are required to support Message Signaled Interrupts (MSI).
However, some legacy operating systems might not recognize MSI. This feature
provides a workaround solution for a PCI-E device to function properly in a system
that is supported by a non-MSI aware OS. When this item is set to Enabled, a
PCI-E device will generate a memory transaction with a correct PAR (Pin Assertion
Register) address and interrupt vector number to be stored in the device's MSI
address and date registers, so the BIOS can initialize this PCI-E device before
booting the OS. The options are Enabled and Disabled .
PCI-Exp. I/O Performance
Some add-on cards perform faster with the coalesce feature, which limits the payload
size to 128 Bytes; while others, with a payload size of 256 Bytes which inhibits
the coalesce feature. Please refer to your add-on card user guide for the desired
setting. The options are Payload (256 Bytes) and Coalesce .
PCI Parity Error Forwarding
The feature allows SERR and PERR errors detected in PCI slots to be sent
(forwarded) to the BIOS DMI Event Log for the user to review. The options are
Enabled and Disabled .
ROM Scan Ordering
This feature allows the user to decide which Option ROM to be activated fi rst. The
options are Onboard fi rst and Add-On fi rst.
PCI Fast Delayed Transaction
Select Enabled to improve DMA transfer rate for 32-bit multimedia PCI cards. The
options are Enabled and Disabled .
Reset Confi guration Data
If set to Yes, this setting clears the Extended System Confi guration Data- (ESCD)
area. The options are Yes and No .