Supero X7DVL-E, Руководство пользователя

Страница: 71 / 99

Chapter 4: BIOS
4-15
Interrupt
This setting allows you to select the IRQ (interrupt request) for serial port A.
The options are IRQ3 and
IRQ4 .
Serial Port B
Use this item to select the control setting for serial port B. The options are Enabled
(user defi ned), Disabled, Auto (BIOS controlled) and OS Controlled.
Mode
This setting allows you to set the type of device that will be connected to serial
port B. The options are Normal and IR (for an infrared device).
Base I/O Address
This setting allows you to select the base I/O address for serial port B. The
options are 3F8, 2F8 , 3E8 and 2E8.
Interrupt
This setting allows you to select the IRQ (interrupt request) for serial port B.
The options are IRQ3 and IRQ4.
Parallel Port
Use this item to select the control setting for the parallel port. The options are
Enabled (user defi ned), Disabled and Auto (BIOS-or OS- controlled).
Base I/O Address
Select the base I/O address for the parallel port. The options are 378 , 278 and
3BC.
Interrupt
This setting allows you to select the IRQ (interrupt request) for the parallel port.
The options are IRQ5 and
IRQ7 .
Mode
This feature allows you to specify the parallel port mode. The options are Output
only, Bi-Directional, EPP and ECP .
DMA Channel
This item allows you to specify the DMA channel for the parallel port. The options
are DMA1 and DMA3 .
Floppy Disk Controller
Use this item to select the control setting for the fl oppy disk controller. The options
are Enabled (user defi ned), Disabled, and Auto (BIOS and OS controlled).