Supero X7DAL-E+ Скачать руководство пользователя страница 63

Страница: 63 / 89

Chapter 4: BIOS

4-5

Parallel ATA

This setting allows the user to enable Parallel ATA. The options are Disabled and

Enabled

Serial ATA

Select Enabled to enable Serial ATA. The options are Disabled and

Enabled.

Native Mode Operation (Available when SATA Controller Mode Operation
is set to Enhanced)

Use this feature to select native mode settings for ATA. The options are: Serial

ATA and

Auto

SATA Controller Mode Operation

Select

Compatible

to allow the SATA and PATA drives to be automatically-

detected and be placed in the Legacy Mode by the BIOS. Select Enhanced to

allow the SATA and PATA drives to be to be automatically-detected and placed

in the Native IDE Mode. (

Note: The Enhanced mode is supported by the

Windows 2000 OS or a later version.)

When the SATA Controller Mode is set

to Enhanced, the following items will display:

Serial ATA (SATA) RAID Enable (Available when SATA Controller

Mode is set to Enhanced)

Select Enable to enable Serial ATA RAID. (For the Windows OS environment, use

the RAID driver if this feature is set to Enabled. When this item is set to Enabled,

the item: "ICH RAID Code Base" will be available for you to select either Intel

or Adaptec Host RAID fi rmware. If this item is set to

Disabled

, the item-SATA

AHCI Enable will be available.) The options are Enabled and

Disabled

ICH RAID Code Base (Available when SATA RAID is Enabled)

Select Intel to enable Intel's SATA RAID fi rmware. Select Adaptec to use Adaptec's

HostRAID fi rmware. The options are

Intel

and Adaptec

SATA AHCI (Available when SATA RAID is Enabled)

Select Enable to enable Serial ATA Advanced Host Interface. (Take caution

when using this function. This feature is for advanced programmers only.) The

options are Enabled and

Disabled

System Memory

This display informs you how much system memory is detected by the BIOS.

Extended Memory

This display informs you how much extended memory is detected by the BIOS.

Содержание X7DAL-E+


























































































Результаты поиска

Содержание X7DAL-E+

Отзывы:

Похожие инструкции для X7DAL-E+

Бренды по названию

Популярные бренды

Supero X7DAL-E+, Руководство пользователя

Результаты поиска

Содержание X7DAL-E+

Отзывы:

Похожие инструкции для X7DAL-E+

Бренды по названию

Популярные бренды