Supero X7DAL-E+, Руководство пользователя

Страница: 62 / 89

4-4
X7DAL-E+ User's Manual

IDE Channel 0 Master/Slave, IDE Secondary Master/Slave, SATA
Port0, SATA Port1, and SATA Port2
These settings allow the user to set the parameters of the slots indicated above.
Press <Enter> to activate the following submenu screen for detailed options of
these items. Set the correct confi gurations accordingly. The items included in the
submenu are:
Type
This option allows the user to select the type of IDE hard drive. The option Auto
will allow the BIOS to automatically confi gure the parameters of the HDD installed
at the connection. Select User to allow the user to enter the parameters of the
HDD installed. Select CDROM if a CDROM drive is installed. Select Removable
ATAPI if other type of ATAPI device is installed. Select None if there is no IDE
device installed.
LBA Format
The following items will be displayed by the BIOS:
Total Sectors:
This item displays the number of total sectors available in the
LBA Format.
Maximum Capacity:
This item displays the maximum capacity in the LBA
Format.
Multi-Sector Transfers
This item allows the user to specify the number of sectors per block to be used
in multi-sector transfer. The options are Disabled, 4 Sectors, 8 Sectors, and
16 Sectors .
LBA Mode Control
This item determines if Phoenix BIOS will access the IDE Channel 0 Master
Device via the LBA mode. The options are Enabled and Disabled.
32 Bit I/O
This option allows the user to enable or disable the function of 32-bit data transfer.
The options are Enabled and Disabled .
Transfer Mode
This option allows the user to set the transfer mode. The options are Standard, Fast
PIO1, Fast PIO2, Fast PIO3, Fast PIO4, FPIO3/DMA1 and FPIO4/DMA2 .
Ultra DMA Mode
This option allows the user to confi gure the Ultra DMA Mode settings. The options
are Disabled, Mode 0, Mode 1, Mode 2 , Mode 3, Mode 4, and Mode 5.