Supero SuperWorkstation 5037A-IL, Руководство пользователя

Страница: 87 / 121

6-14
S
uper
W
orkstation 5037A-IL User's Manual
6-10 Power Supply
The UP workstation SYS-5037A-IL includes a 500 Watt fixed power supply. In the
unlikely event that it becomes necessary to replace the power supply, follow the
instructions below.
Changing the Power Supply
1. Power down the server and remove the power cord from the rear of the
power supply.
2. Remove the side cover. (See page 6-2).
3. Disconnect the motherboard cables.
4. Remove the screws securing the power supply to the chassis, which are
located on the rear of the chassis. Set these screws aside for later use.
5. Gently lift the power supply out of the chassis.
6. Replace the failed power supply with an identical power supply model.
7. Secure the new power supply using the screws previously set aside.
8. Close the side cover.
9. Plug the AC power cord back into the module and power-up the system.
Figure 6-13. Removing the Power Supply
Power Supply