Supero SuperWorkstation 5037A-IL, Руководство пользователя

Страница: 80 / 121

Chapter 6: Advanced Chassis Setup
6-7
Figure 6-6. Removing a 2.5" Hard Drive
1
4
1
5
Thumb Screw
6-5 Removing and Installing 2.5" Hard Drives (Optional)
The SC732 chassis supports an optional hard drive cage (MCP-220-73201-0N) for
up to four 2.5" hard drives. The server must be powered-down before hard drives
can be removed from the hard drive cage.
Removing and Installing 2.5" Hard Drives
1. Power down the server, remove the cover and remove the power cord from
the rear of the power supply.
2. Loosen the thumb screw securing the 2.5" hard drive cage to the chassis.
3. Disconnect all cables from the hard drive.
4. Slide the 2.5" hard drive cage out of the chassis.
5. If a hard drive is already present, remove it by carefully pulling the sides of
the hard drive carrier outward.
6. Remove the hard drive from the hard drive carrier.