Supero SuperWorkstation 5037A-IL, Руководство пользователя

Страница: 78 / 121

Chapter 6: Advanced Chassis Setup
6-5
8. Remove the hard drive from the hard drive carrier.
9. Insert the new hard drive into the hard drive carrier.
Figure 6-4. Removing a 3.5" Hard Drive from a Hard Drive Carrier
1
6
1
6
Warning: Only enterprise level HDDs are recommended for use in this chassis.
10. Insert the hard drive carrier into the hard drive cage, sliding it towards the
back of the the hard drive cage until it clicks into a locked position.
11. If desired, each hard drive carrier may be secured to the exterior of the hard
drive cage using one optional screw.
12. Rotate the hard drive cage 90 degrees inward, returning it to the closed,
operational position in the chassis.
13. Connect the related cables to the hard drives.