Supero SuperWorkstation 5037A-IL, Руководство пользователя

Страница: 83 / 121

6-10
S
uper
W
orkstation 5037A-IL User's Manual
6-7 Installing a 5.25" Optical Device (Optional)
The SC732 chassis has two optical device slots, which support up to two optional
devices, such as DVD-ROM drives.
Installing an Optical Device
1. Power down the server, remove the cover and remove the power cord from
the rear of the power supply.
2. Remove the front bezel from the chassis by lifting it upwards from the bottom,
and pulling off the front of the chassis.
3. Remove the cover plate from the optical device slot on the front of the chas-
sis.
4. Install the bracket rail (A) onto one side of the optical device, by inserting the
pins of the bracket into the mounting holes on one side of the 3.5" optical
device.
5. Slide the optical device into the chassis.
6. If desired, screws may be used where indicated below (B) to secure the opti-
cal device into chassis.
1
4
1
3
1
2
1
1
Figure 6-9. Installing the Optical Device
Bracket
Rail (A)
Optional
Screw (B)