Supero SuperServer E200-8B, Руководство пользователя

Страница: 26 / 92

SUPERSERVER E200-8B User's Manual
2-12
Fan Header
Pin Definitions
Pin# Definition
1 Ground (Black)
2 2.5A/+12V
(Red)
3 Tachometer
4 PWM_Control
Fan Headers (Fan 1/Fan 2)
The X10SBA has two fan headers (Fan
1/Fan 2). These are 4-pin fan headers.
Although pins 1-3 of the fan headers are
backward compatible with the traditional
3-pin fans, we recommend the use 4-pin
fans to take advantage of the fan speed
control. This allows the fan speeds to
be automatically adjusted based on the
motherboard temperature. Refer to the
table on the right for pin definitions.
Power LED/Speaker
Pins 1-3 of JD1 are used for power
LED indication, and pins 4-7 are for the
speaker. See the tables on the right for pin
definitions. Please note that the speaker
connector pins (4-7) are used with an
external speaker. If you wish to use the
onboard speaker, you should close pins
6-7 with a cap.
Speaker Connector
Pin Settings
Pin Setting Definition
Pins 4-7 External Speaker
Pins 6-7 Internal Speaker
PWR LED Connector
Pin Definitions
Pin Setting Definition
Pin 1 Anode (+)
Pin2 Cathode (-)
Pin3 NA
Internal Speaker/Buzzer (SP1)
The internal speaker on SP1 can be used
to provide audible indications for various
beep codes.
Internal Buzzer
Pin Definition
Pin# Definitions
Pin 1 Pos. (+) Beep In
Pin 2 Neg. (-) Alarm
Speaker