Supero SuperServer E200-8B, Руководство пользователя

Страница: 19 / 92

Chapter 2: Advanced Motherboard Setup
2-5
2-4 Connecting Cables
As an embedded system, there are a limited number of cables in the E200-8B.
Data Cables
The cables used to transfer data from the peripheral devices have been carefully
routed to prevent them from blocking the flow of cooling air that moves through the
system from front to back.
If you need to disconnect any cables, take care to keep them routed as they were
originally when reconnecting them. Also, make sure the red wires connect to the
pin 1 locations.
Important! Make sure the the cables do not come into contact
with the fans.
Connecting the Power Button
JF1 contains header pins for various front control panel connectors. Rather than a
control panel, this server has a power control button with an LED display.
The front control panel cable has a single connector to the control panel in the
SC101S chassis and splits into eight wires to the control panel header on the
motherboard.