Supero SuperServer E200-8B, Руководство пользователя

Страница: 29 / 92

Chapter 2: Advanced Motherboard Setup
2-15
Manufacturer Mode Select
Close pins 2 and 3 of jumper JPME2 to
bypass SPI flash security and force the
system to operate in the Manufacturer
Mode, allowing the user to flash the
system firmware from a host server for
system setting modifications. See the
table on the right for jumper settings.
Manufacture Mode Select
Jumper Settings
Jumper Setting Definition
Pins 1-2 Normal (Default)
Pins 2-3 Manufacture Mode
USB Wake-Up
Use the jumper JPUSB1 to "wake-up"
your system by pressing a key on a USB
keyboard or clicking the USB mouse
connected to the onboard USB ports.
JPUSB1 is used together with a USB
Wake-Up feature in the BIOS. Enable this
jumper and the "USB Wake-Up" support
in the BIOS to wake up your system via
USB devices.
USB Wake-Up Enable
Jumper Settings
Pin# Definition
Pins 1-2 Enabled (Default)
Pins 2-3 Disabled