Supero SUPERSERVER 8027R-7RFT+, Руководство пользователя

Страница: 70 / 131

Chapter 5: Advanced Serverboard Setup
5-19
Chassis Intrusion
The Chassis Intrusion header is
designated JL1. Attach an appropriate
cable from the chassis to inform you of
a chassis intrusion when the chassis
is opened
Chassis Intrusion
Pin Defi nitions (JL1)
Pin# Defi nition
1 Intrusion Input
2 Ground
Power LED/Speaker
On JD1 header, pins 1-3 are for a
power LED and pins 4-7 are for the
speaker. Pins 4-7 are available for
connection to an external speaker. If
you wish to use the onboard speaker,
please close pins 6-7. See the table
on the right for speaker pin defi nitions.
PWR LED
Connector
Pin Defi nitions
Pin# Defi nition
1 Anode (+)
2 Cathode (-)
3 NA
Speaker Connector
Pin Settings
Pin# Defi nition
Pins 4-7 External Speaker
Pins 6-7 Onboard Speaker
Overheat LED/Fan Fail
The JOH1 header is used to connect
an LED to provide warning of chassis
overheating. This LED will blink to
indicate a fan failure. Refer to the table
on right for pin defi nitions.
OH/Fan Fail LED
States
State Message
Solid Overheat
Blinking Fan Fail
Overheat LED
Pin Defi nitions
Pin# Defi nition
1 5vDC
2 OH Active
DOM Power Connector
A power connector for SATA DOM
(Disk On Module) devices is located
at JSD1. Connect an appropriate cable
here to provide power support for your
DOM devices.
DOM PWR
Pin Defi nitions
Pin# Defi nition
1 +5V
2 Ground
3 Ground