Supero SUPERSERVER 8027R-7RFT+, Руководство пользователя

Страница: 114 / 131

Chapter 7: BIOS
7-19
Data Bits
Use this feature to set the data transmission size for Console Redirection.
The options are 7 Bits and 8 Bits .
Parity
A parity bit can be sent along with regular data bits to detect data transmission
errors. Select Even if the parity bit is set to 0, and the number of 1's in data
bits is even. Select Odd if the parity bit is set to 0, and the number of 1's in
data bits is odd. Select None if you do not want to send a parity bit with your
data bits in transmission. Select Mark to add a mark as a parity bit to be sent
along with the data bits. Select Space to add a Space as a parity bit to be
sent with your data bits. The options are None , Even, Odd, Mark and Space.
Stop Bits
A stop bit indicates the end of a serial data packet. Select 1 Stop Bit for
standard serial data communication. Select 2 Stop Bits if slower devices are
used. The options are 1 and 2.
Flow Control
This feature allows the user to set the fl ow control for Console Redirection
to prevent data loss caused by buffer overfl ow. Send a "Stop" signal to stop
sending data when the receiving buffer is full. Send a "Start" signal to start
sending data when the receiving buffer is empty. The options are None and
Hardware RTS/CTS.
VT-UTF8 Combo Key Support
Select Enabled to enable VT-UTF8 Combination Key support for ANSI/VT100
terminals. The options are Enabled and Disabled .
Recorder Mode
Select Enabled to capture the data displayed on a terminal and send it as
text messages to a remote server. The options are Disabled and Enabled.
Resolution 100x31
Select Enabled for extended-terminal resolution support. The options are
Disabled and Enabled.
Legacy OS Redirection Resolution
Use this feature to select the number of rows and columns used in Console
Redirection for legacy OS support. The options are 80x24 and 80x25 .