Supero SUPERSERVER 8027R-7RFT+, Руководство пользователя

Страница: 67 / 131

5-16
SUPERSERVER 8027R-TRF+/7RFT+ USER'S MANUAL
Power Button
The power button connection is located
on pins 1 and 2 of JF1. Momentarily
contacting both pins will power on/off
the system. This button can also be
confi gured to function as a suspend
button (with a setting in the BIOS). To
turn off the power when the system is
set to suspend mode, press the button
for at least 4 seconds. Refer to the
table on the right for pin defi nitions.
5-8 Connector Defi nitions
+12V 8-pin Power
Pin Defi nitions
Pins Defi nition
1 - 4 Ground
5 - 8 +12V
Required Connection
ATX Power 24-pin Connector
Pin Defi nitions
Pin# Defi nition Pin # Defi nition
13 +3.3V 1 +3.3V
14 -12V 2 +3.3V
15 COM 3 COM
16 PS_ON 4 +5V
17 COM 5 COM
18 COM 6 +5V
19 COM 7 COM
20 Res (NC) 8 PWR_OK
21 +5V 9 5VSB
22 +5V 10 +12V
23 +5V 11 +12V
24 COM 12 +3.3V
Power Button
Pin Defi nitions (JF1)
Pin# Defi nition
1 PW_ON
2 Ground
Processor Power Connector
JPW2, JPW3, JPW4 and JPW5
provide power for the processors.
All four should be connected to your
power supply. See the table on the
right for pin defi nitions.
Main ATX Power Supply Connector
A 2 4 - p i n m a i n p o w e r s u p p l y
connector(JPW1) and four 8-pin CPU
PWR connectors (JPW2/3/4/5) are
located on the motherboard. These
power connectors meet the SSI EPS
12V specification. You must also
connect the 8-pin processor power
connectors to your power supply (see
below).