Supero SUPERSERVER 8027R-7RFT+, Руководство пользователя

Страница: 68 / 131

Chapter 5: Advanced Serverboard Setup
5-17
Reset Button
Pins 3 and 4 of JF1 attaches to the
reset button on the computer chassis.
See the table on the right for pin
defi nitions.
Reset Button
Pin Defi nitions
(JF1)
Pin# Defi nition
3 Reset
4 Ground
Overheat/Fan/Pwr Fail/UID LED
Connect an LED to pins 7 and 8 of JF1
to use the Overheat/Fan Fail/Power
Fail/UID LED functions. The red LED
on pin 7 provides warning of overheat,
fan failure or power failure. The blue
LED on pin 8 works as the front panel
UID LED indicator. The red LED takes
precedence over the blue LED by
default. Refer to the table on the right
for pin defi nitions.
HDD LED
The HDD LED connection is located
on pins 13 and 14 of JF1. This LED is
used to display all SATA activity. See
the table on the right for pin defi nitions.
NIC2 LED
Pin Defi nitions (JF1)
Pin# Defi nition
9 Activity
10 Link
NIC2 (JLAN2) LED
The LED connections for JLAN2 are on
pins 9 and 10 of JF1. Attach an LED
cable to display network activity. See
the table on the right for pin defi nitions.
NIC1 LED
Pin Defi nitions (JF1)
Pin# Defi nition
11 Activity
12 Link
NIC1 (JLAN1) LED
The LED connections for JLAN1 are on
pins 11 and 12 of JF1. Attach an LED
cable to display network activity. See
the table on the right for pin defi nitions.
OH/Fan Fail/ Pwr Fail/UID LED
Pin Defi nitions (JF1)
Pin# Defi nition
7 Red + (Blue LED Cathode)
8 Blue (OH/Fan Fail/
PWR Fail/UID LED)
OH/Fan Fail Indicator Status
State Defi nition
Off Normal
On Overheat
Flashing Fan Fail
HDD LED
Pin Defi nitions (JF1)
Pin# Defi nition
13 3.3V
14 HD Active