Supero SUPERSERVER 8017R-7FT+, Руководство пользователя

Страница: 84 / 104

7-18
S
UPER
S
ERVER 8017R-TF+/8017R-7FT+ User's Manual
VGA Priority
This feature allows the user to select the graphics adapter to be used as the primary
boot device. The options are Onboard , and Offboard.
Network Stack
Select Enabled enable PXE (Preboot Execution Environment) or UEFI (Unifi ed
Extensible Firmware Interface) for network stack support. The options are Enabled
and Disabled .
IPv4 PXE Support (Available when Network Stack is set to Enabled)
Set this item to Enabled to activate IPv4 PXE Support. The options are Enabled
and Disabled.
IPv6 PXE Support (Available when Network Stack is set to Enabled)
Set this item to Enabled to activate IPv6 PXE Support. The options are Enabled
and Disabled .

Super IO Confi guration
Super IO Chip: This item displays the Super IO chip used in the motherboard.

Serial Port 1 Confi guration
Serial Port
Select Enabled to enable a serial port specifi ed by the user. The options are En-
abled and Disabled.
Device Settings
This item displays the settings of Serial Port 1.
Change Settings
Use this feature to set the optimal Platform Environment Control Interface (PECI)
setting for a serial port specifi ed. The default setting is Auto , which will allow the
AMI BIOS to automatically select the best setting for the PECI platform.
Device Mode
Use this feature to select the desired mode for a serial port specifi ed. The options
are Normal and High Speed.