Supero SUPERSERVER 8017R-7FT+, Руководство пользователя

Страница: 46 / 104

5-18
S
UPER
S
ERVER 8017R-TF+/8017R-7FT+ User's Manual
T-SGPIO 1/2 Headers
Two SGPIO (Serial-Link General
Purpose Input/Output) headers are
located on the motherboard. These
headers support Serial Link interfaces
for onboard SATA connections. See
the table on the right for pin defi ni-
tions.
T-SGPIO
Pin Defi nitions
Pin# Defi nition Pin Defi nition
1 NC 2 NC
3 Ground 4 Data
5 Load 6 Ground
7 Clock 8 NC
NC = No Connection
IPMB Header
A System Management Bus header
for IPMI 2.0 is located at JIPMB1.
Connect the appropriate cable here
to use the IPMB I
2
C connection on
your system.
IPMB Header
Pin Defi nitions
Pin# Defi nition
1 Data
2 Ground
3 Clock
4 No Connection
Unit Identifi er Switch
A Unit Identifier (UID) switch and
two LED indicators are provided on
the serverboard. The UID Switch is
located next to the LAN ports on the
I/O backplane. The rear UID LED
is located next to the UID switch.
The Front Panel UID LED is located
on pins 7/8 of JF1 (Control Panel
header). Connect a cable to pin 8
on JF1 for the Front Panel UID LED.
When you press the UID switch, both
the rear and the Front Panel UID
indicators will be turned on. Press
the UID switch again to turn off both
LED Indicators. These UID Indicators
provide easy identifi cation of a system
unit that may be in need of service.
Note: UID can also be triggered via
IPMI. For more information on IPMI,
please refer to the IPMI User's Guide
posted on our Website @ http://www.
supermicro.com.
UID Switch
Pin# Defi nition
1 Ground
2 Ground
3 Button In
4 Ground
UID LED (LE2)
Status
Color/State OS Status
Blue: On Windows OS Unit Identifi ed
Blue:
Blinking Linux OS Unit Identifi ed