Supero SUPERSERVER 8017R-7FT+, Руководство пользователя

Страница: 64 / 104

6-10
S
UPER
S
ERVER 8017R-TF+/8017R-7FT+ User's Manual
6-6 Power Supply
The SuperServer 8017R-TF+/8017R-7FT+ has a single 1400 watt power supply,
which is auto-switching capable. This enables it to automatically sense and operate
at a 100v to 240v input voltage. An amber light will be illuminated on the power
supply when the power is off. An illuminated green light indicates that the power
supply is operating.
Power Supply Failure
If the power supply unit fails, the system will shut down and you will need to replace
the unit. Replacement units can be ordered directly from Supermicro (see contact
information in the Preface). As there is only one power supply unit in the 8017R-
TF+/8017R-7FT+, power must be completely removed from the server before
removing and replacing the power supply unit for whatever reason.
1. First unplug the power cord from the system (from I/O side).
2. Push the release tab (on the back of the power supply) to the side and then
pull the module straight out (see Figure 6-6). The power supply wiring was
designed to detach automatically when the module is pulled from the chassis.
3. Replace the failed power module with another identical power supply module.
4. Push the new power supply module into the power bay until you hear a click.
5. Finish by plugging the AC power cord back into the system and powering up
the system by depressing the power on/off button.