Supero SuperServer 7043L-8R, Руководство пользователя

Страница: 41 / 114

Chapter 5: Advanced Motherboard Setup
5-7
5-4 I/O Ports
The I/O ports are color coded in conformance with the PC 99 specification.
See Figure 5-4 below for the colors and locations of the various I/O ports.
Figure 5-4. Rear Panel IO Port Locations and Definitions
5-5 Installing Memory
Note: Check the Supermicro web site for recommended memory modules:
http://www.supermicro.com/TECHSUPPORT/FAQs/Memory_vendors.htm
CAUTION
Exercise extreme care when installing or removing DIMM
modules to prevent any possible damage. Also note that the
memory is interleaved to improve performance (see step 1).
DIMM Installation (See Figure 2-2)
1. Insert an even number of memory modules. Interleaved memory requires
you to install two modules at a time. With the X5DL8-GG, begin from
the two slots of the last bank and work your way toward the two slots
of Bank 1.
2. Insert each DIMM module vertically into its slot. Pay attention to the
notch along the bottom of the module to prevent inserting the DIMM
module incorrectly.
3. Gently press down on the DIMM module until it snaps into place in the
slot. Repeat for all modules (see step 1 above).
Parallel Port (Burgundy)
Mouse
(Green)
Keyboard
(Purple)
USB Ports COM1 Port
(Turquoise)
GLAN1 GLAN2 VGA (Monitor) Port
(Blue)