Supero SuperServer 7043L-8R, Руководство пользователя

Страница: 43 / 114

Chapter 5: Advanced Motherboard Setup
5-9
5-6 Adding PCI Cards
1. PCI expansion slots:
The X5DL8-GG system board has six 64-bit PCI-X slots. A maximum of
three may be set for 133 MHz operation (the default setting is all slots at
100 MHz.) The backplane of the 7043L-8R has seven I/O slots that allow
you to have a full complement of PCI cards installed on the system.
2. PCI card installation:
Before installing a PCI add-on card, make sure you choose the correct
slot for the type of card you are installing (see step 1 above). Begin by
removing the I/O shield from the backplane of the server corresponding to
the PCI slot you wish to populate. Insert the card into the slot on the
motherboard, pushing down with your thumbs evenly on both sides of the
card. Finish by using a screw to secure the top of the card shield to the
chassis. The I/O shields protect the motherboard and its components
from EMI (electromagnetic interference) and aid in proper ventilation of
the server, so make sure there is always a shield covering each slot.