Supero SuperServer 7043L-8R, Руководство пользователя

Страница: 48 / 114

5-14
S
UPER
S
ERVER 7043L-8R Manual
Power Button
The Power button connection is
located on pins 1 and 2 of JF1.
Momentarily contacting both pins
will power on/off the system. This
button can also be configured to
function as a suspend button (see
the Power Button Mode setting in
B I O S ) . T o t u r n o f f t h e p o w e r
when set to suspend mode, de-
press the button for at least 4
seconds. Refer to the table on the
right for pin definitions.
P in
Number
1
2
Definition
PW _O N
G round
PW R _O N Connector
P in Definitions
(JF1)
Reset
The Reset connection is located
on pins 3 and 4 of JF1. Attach it
to the hardware reset switch on
the computer case. Refer to the
table on the right for pin defini-
tions.
Pin
Number
3
4
Definition
Reset
Ground
Reset Pin
Definitions
(JF1)
Serial Ports
The COM1 serial port is located
under the parallel port (see Figure
2-3). See the table on the right for
p i n d e f i n i t i o n s . S e e t h e
motherboard layout diagrams for
the location of the COM2 connec-
tor, which is a header.
Serial Port Pin Definitions
(COM1, COM2)
Pin Number Definition
1 CD
2 RD
3 TD
4 DTR
5 Ground
Pin Number Definition
6 DSR
7 RTS
8 CTS
9 RI
10 NC
Chassis Intrusion
A Chassis Intrusion header is lo-
cated at JP57. Attach the appro-
priate cable to inform you of a
chassis intrusion. JF2 also con-
tains a 2-pin header for chassis
intrusion.