Supero SuperServer 6036T-3R, Руководство пользователя

Страница: 10 / 102

1-2
S
UPER
S
ERVER 6036T-3R User's Manual
1-2 Serverboard Features
At the heart of the SuperServer 6036T-3R lies the X8DT3, a dual processor
serverboard based on the Intel IOH-36D + ICH10R chipset and designed to provide
maximum performance. Below are the main features of the X8DT3. (See Figure 1-1
for a block diagram of the chipset).
Processors
The X8DT3 supports single or dual Intel® Xeon 5500 Series processors and future
Intel Nehalem processor families (next generation Intel Xeon® processor). Please
refer to the serverboard description pages on our web site for a complete listing of
supported processors (www.supermicro.com).
Memory
The X8DT3 has twelve 240-pin DIMM slots that can support up to 96 GB of DDR3-
1333/1066/800 registered ECC SDRAM. See Chapter 5 for details.
Onboard SAS
An onboard LSI 1068E SAS controller in integrated into the X8DT3 for an 8-port SAS
subsystem. The hot-swap SAS drives are connected to a backplane that provides
power, bus termination and confi guration settings.
Note: The operating system you use must have RAID support to enable the hot-
swap capability and RAID function of the SAS drives. RAID 0, 1, 5 and 10 are sup-
ported. Refer to the following ftp site for setup guidelines <ftp://ftp.supermicro.com/
driver/SAS/LSI/LSI_SAS_EmbMRAID_SWUG.pdf> and Supermicro's web site for
additional inmformation < http://www.supermicro.com/support/manuals/>.
Serial ATA
A Serial ATA controller is integrated into the ICH10R (South Bridge) portion of the
IOH-36D chipset to provide a six-port 3 Gb/s SATA subsystem, which is RAID 0, 1,
10 and 5 supported. The SATA drives are hot-swappable units.
Note: The operating system you use must have RAID support to enable the hot-
swap capability and RAID function of the SATA drives. RAID 5 requires the use
of an iButton.