Supero SuperServer 6036T-3R Скачать руководство пользователя страница 86

Страница: 86 / 102

7-16

UPER

ERVER 6036T-3R User's Manual

Sredir Memory Display Delay

This feature defi nes the length of time in seconds to display memory information.

The options are

No Delay,

Delay 1 Sec, Delay 2 Sec, and Delay 4 Sec.

System Health

Monitor

This feature allows the user to monitor system health and review the status of each

item as displayed.

CPU Overheat Alarm

This option allows the user to select the CPU Overheat Alarm setting which de-

termines when the CPU OH alarm will be activated to provide warning of possible

CPU overheat.

Warning!

Any temperature that exceeds the CPU threshold temperature pre-

defi ned by the CPU manufacturer may result in CPU overheat or system

instability. When the CPU temperature reaches this predefi ned threshold,

the CPU and system cooling fans will run at full speed.

To avoid possible system overheating, please be sure to provide ad-

equate airfl ow to your system.

The options are:

The Early Alarm: Select this setting if you want the CPU overheat alarm (includ-

•

ing the LED and the buzzer) to be triggered as soon as the CPU temperature

reaches the CPU overheat threshold as predefi ned by the CPU manufacturer.

The Default Alarm

•

: Select this setting if you want the CPU overheat alarm

(including the LED and the buzzer) to be triggered when the CPU temperature

reaches about 5

C above the threshold temperature as predefi ned by the CPU

manufacturer to give the CPU and system fans additional time needed for CPU

and system cooling. In both the alarms above, please take immediate action

as shown below.

CPU Temperature/System Temperature

This feature displays current temperature readings for the CPU and the System.

The following items will be displayed for your reference only:

CPU Temperature

The CPU thermal technology that reports absolute temperatures (Celsius/Fahr-

enheit) has been upgraded to a more advanced feature by Intel in its newer

processors. The basic concept is each CPU is embedded by unique temperature

Содержание SuperServer 6036T-3R







































































































Результаты поиска

Содержание SuperServer 6036T-3R

Отзывы:

Похожие инструкции для SuperServer 6036T-3R

Бренды по названию

Популярные бренды

Supero SuperServer 6036T-3R, Руководство пользователя

Результаты поиска

Содержание SuperServer 6036T-3R

Отзывы:

Похожие инструкции для SuperServer 6036T-3R

Бренды по названию

Популярные бренды