Supero SuperServer 6036T-3R Скачать руководство пользователя страница 95

Страница: 95 / 102

Chapter 7: BIOS

7-25

Boot Device Priority

This feature allows the user to specify the sequence of priority for the Boot Device.

The settings are 1st boot device, 2nd boot device, 3rd boot device, 4th boot device,

5th boot device and Disabled.

1st Boot Device - 1st Floppy Drive

•

2nd Boot Device - [USB: XXXXXXXXX]

•

Hard Disk Drives

This feature allows the user to specify the boot sequence from all available hard

disk drives. The settings are Disabled and a list of all hard disk drives that have

been detected (i.e., 1st Drive, 2nd Drive, 3rd Drive, etc).

Removable Drives

This feature allows the user to specify the boot sequence from available Removable

Drives. The settings are 1st boot device, 2nd boot device, and Disabled.

1st Drive - 1st Floppy Drive

•

2nd Drive - [USB: XXXXXXXXX]

•

CD/DVD Drives

This feature allows the user to specify the boot sequence from available CD/DVD

Drives (i.e., 1st Drive, 2nd Drive, etc).

Содержание SuperServer 6036T-3R







































































































Результаты поиска

Содержание SuperServer 6036T-3R

Отзывы:

Похожие инструкции для SuperServer 6036T-3R

Бренды по названию

Популярные бренды

Supero SuperServer 6036T-3R, Руководство пользователя

Результаты поиска

Содержание SuperServer 6036T-3R

Отзывы:

Похожие инструкции для SuperServer 6036T-3R

Бренды по названию

Популярные бренды