Supero SuperServer 5013C-M, Руководство пользователя

Страница: 48 / 96

5-12
S
UPER
S
ERVER 5013C-M User's Manual
Reset Connector
The reset connector is located on
pins 3 and 4 of JF1 and attaches
to the reset switch on the com-
puter chassis. See the table on
the right for pin definitions.
PW_ON Connector
The PW_ON connector is located
on pins 1 and 2 of JF1. This
header should be connected to
the chassis power button, which
you may also configure to put the
system into suspend mode (see
the Power Button Mode setting in
B I O S ) . T o t u r n o f f t h e p o w e r
when the suspend mode is en-
abled, depress the power button
for at least 4 seconds. See the
table on the right for pin defini-
tions.
Pin
Number
1
2
Definition
Signal
+3V Stby
PW_ON
Pin Definitions
(JF1)
Pin
Number
3
4
Definition
Reset
Ground
Reset Pin
Definitions
(JF1)
Overheat LED (OH)
Connect an LED to the OH connec-
tion on pins 7 and 8 of JF1 to pro-
vide advanced warning of chassis
overheating. Refer to the table on
the right for pin definitions.
Overheat (OH) LED
Pin Definitions
(JF1)
Pin
Number
7
8
Definition
Vcc
GND
GLAN1/GLAN2 LED
The GLAN1 and GLAN2 LED connec-
tions for the Ethernet ports are lo-
cated on pins 9 and 10 (GLAN2) and
11 and 12 (GLAN1) of JF1. Attach
LAN LED cables to display network
activity. See the table on the right
for pin definitions.
GLAN1/GLAN2 LED
Pin Definitions
(JF1)
Pin
Number
9,10
11,12
Definition
Vcc
GND