Supero SuperServer 5013C-M, Руководство пользователя

Страница: 20 / 96

2-2
S
UPER
S
ERVER 5013C-M User's Manual
Choosing a Setup Location
- Leave enough clearance in front of the rack to enable you to open the
front door completely (~25 inches).
- Leave approximately 30 inches of clearance in the back of the rack to
allow for sufficient airflow and ease in servicing.
- This product is for installation only in a Restricted Access location
(dedicated equipment rooms, service closets and the like).
Rack Precautions
- Ensure that the leveling jacks on the bottom of the rack are fully ex-
tended to the floor with the full weight of the rack resting on them.
- In a single rack installation, stabilizers should be attached to the rack.
- In multiple rack installations, the racks should be coupled together.
- Always make sure the rack is stable before extending a component
from the rack.
- You should extend only one component at a time - extending two or
more simultaneously may cause the rack to become unstable.
Server Precautions
- Review the electrical and general safety precautions in Chapter 4.
- Determine the placement of each component in the rack before you
install the rails.
-
Install the heaviest server components on the bottom of the rack
first, and then work up.
- Use a regulating uninterruptible power supply (UPS) to protect the
server from power surges, voltage spikes and to keep your system op-
erating in case of a power failure.
-
Allow the power supply units and hot plug Serial ATA drive to cool
before touching them.
-
Always keep the rack's front door and all panels and components on
the servers closed when not servicing to maintain proper cooling.
! !
Warnings and Precautions!