Supero SuperServer 5013C-i, Руководство пользователя

Страница: 53 / 118

Chapter 5: Advanced Motherboard Setup
5-17
USB Wake-Up
Use JPUSB to enable or disable
USB Wake-Up, which allows you
t o w a k e u p t h e s y s t e m b y d e -
pressing a key on the keyboard or
by clicking the mouse when either
is connected to the USB1 or USB2
port. Enable the jumper to allow
the system to be woken up from
an S1 or S3 state in Windows OS.
S e e t h e t a b l e o n t h e r i g h t f o r
j u m p e r s e t t i n g s . T h i s f e a t u r e
works with the USB1 and USB2
ports only.
Jumper
Position
1-2
2-3
Definition
Disabled
Enabled
USB Wake-Up
Jumper Settings
(JPUSB)
Watch Dog Enable/Disable
JP8 enables controls the Watch
Dog function, a system monitor
that takes action when a software
application freezes the system.
Pins 1-2 will have WD reset the
system if a program freezes. Pins
2-3 will generate a non-maskable
interrupt for the program that has
frozen. See the table on the right
for jumper settings. Watch Dog
must also be enabled in BIOS.
Jumper
Position
Pins 1-2
Pins 2-3
Open
Definition
W D to Reset
W D to NMI
Disabled
Watch Dog
Jumper Settings (JP8)
Speaker Jumper
The speaker jumper is located on
J18 and allows you to choose be-
tween using the internal or exter-
nal speakers. For the internal
speaker, jump pins 3 and 4. To
use an external speaker, place the
speaker cable's header on all four
pins See the table on the right.
Pins
1 through 4
3 and 4
Definition
External Spkr
Internal Spkr
Speaker
Jumper Settings (J18)
Note: when Watch Dog is enabled, the user must
write their own application software to disable
the Watch Dog Timer.