Supero SuperServer 4048B-TRFT, Руководство пользователя

Страница: 66 / 148

5-18
SUPERSERVER 4048B-TRFT USER'S MANUAL
Reset Connector
The reset connector is located on pins 3
and 4 of JF1 and attaches to the reset
button on the computer chassis. See the
table on the right for pin de
fi nitions.
Reset Button
Pin Defi nitions
(JF1)
Pin# De fi nition
3 Reset
4 Ground
Power Fail LED
The Power Fail LED connection is located
on pins 5 and 6 of JF1. Refer to the table
on the right for pin de
fi nitions.
PWR Fail LED
Pin Defi nitions (JF1)
Pin# De fi nition
5 3.3V
6 PWR Supply Fail
PW_ON Connector
The Power Button connection is located
on pins 1 and 2 of JF1. Momentarily
contacting both pins will power on/off the
system. This button can also be con
fi gured
to function as a suspend button (with a
setting in the BIOS - See Chapter 5). To
turn off the power when the system is
in suspend mode, press the button for 4
seconds or longer. Refer to the table on
the right for pin de
fi nitions.
Power Button
Pin Defi nitions
(JF1)
Pin# De fi nition
1 Signal
2 Ground
Overheat (OH)/Fan Fail/PWR Fail/UID
LED
Connect an LED cable to the OH/Fan Fail/
FP UID connection on pins 7 and 8 of JF1
to provide advanced warnings of chassis
overheating or fan failure. It also works as
the front panel UID LED indicator. The red
LED takes precedence over the blue LED
by default. Refer to the table on the right
for pin de
fi nitions.
OH/Fan Fail/PWR Fail/UID LED
Pin Defi nitions (JF1)
Pin# De fi nition
7 Red+ (Blue LED Cathode)
8 Blue+ (OH/Fan Fail/PWR Fail/
UID LED)
OH/Fan Fail
Indicator Status
State De fi nition
Off Normal
On Overheat
Flash-
ing Fan Fail