Supero SuperServer 4048B-TRFT, Руководство пользователя

Страница: 104 / 148

7-14
SUPERSERVER 4048B-TRFT USER'S MANUAL
PCI-E Port
Select Enable to enable the PCI-E port speci fi ed by the user. The options are
Auto
, Enable, and Disable.
Hot Plug Capable
Select Enable to enable hot-plugging support for the PCI-E port speci fi ed by the
user, which will allow the user to replace the device installed on the port without
shutting down the system. The options are
Disable
and Enable.
PCI-E Port Link
Select Disable to disable the link that is not involved in PCI training, but its CFG
space is still active. The options are
Enable
and Disable.
Link Speed
Use this item to select the PCI-E link speed for the PCI-E port speci fi ed by the
user. The options are GEN1 (2.5 GT/s), GEN2 (5 GT/s), and
Auto
.
Override Max Link Width
This item allows the user to set the link speed for a selected PCI-E port to over-
ride the maximum link-width which was previously set by PCI-Bifurcation. The
options are
Auto
, x1, x2, x4, x8, and x16.
PCI-E Port DeEmphasis
Use this item to select the De-Emphasis control setting for a PCI-E port speci fi ed
by the user. The options are
-6.0 dB
and -3.5 dB.
PCI-E ASPM Support
Select Enable to support the Active State Power Management (ASPM) level for
a PCI-E port speci
fi ed by the user. Select Disabled to disable ASPM support.
The options are
Disable
and L1 Only.
Fatal Err (Error) Over
Select Enable to force the fatal error propogation to the II0 core-error-logic for
the port speci
fi ed by the user. The options are
Disable
and Enable.
Non-Fatal Err (Error) Over
Select Enable to force the non-fatal error propogation to the II0 core error logic
for the port speci
fi ed by the user. The options are
Disable
and Enable.
Corr (Correctable) Err (Error) Over
Select Enable to force the correctable error propogation to the II0 core-error-logic
for the port speci
fi ed by the user. The options are
Disable
and Enable.