Supero SuperServer 4048B-TRFT, Руководство пользователя

Страница: 58 / 148

5-10
SUPERSERVER 4048B-TRFT USER'S MANUAL
5-5 Installing Memory
Caution:
exercise extreme care when installing or removing DIMMs to prevent any
possible damage. DIMMs should be installed with the memory card removed from
the baseboard. See the tables on page 5-12 for details on populating RDIMM/LDIMM
memory.
Installing Memory
Insert the desired number of DIMMs into the slots on a memory card in the order
shown in Figure 5-3. For best performance, use the memory modules of the same
type and speed.
1. Push the release tabs outwards on both ends of the DIMM slot to unlock it.
2. Align the key of the DIMM module with the receptive point on the memory
slot.
3. Press both ends of the module straight down into the slot until the module
snaps into place.
4. Press the release tabs to the locking positions to secure the DIMM module
into the slot.
5. Reverse the steps above to remove DIMM modules.
Memory Support
With all eight cards fully populated, the system will support up to a total of 6 TB of
DDR3-1600/1333/1066/800 ECC RDIMM/LDIMM memory. Check the Supermicro
website (
www.supermicro.com ) for the latest memory support information.
Figure 5-3. X10QBi-MEM1 Memory Card Layout
X10QBi-MEM1
D
1
D
3
D
2 1
D
6 5
D
4 1 8
7 4 3 2
BAR CO D E
A3
D 1 D2 C1 C 2 C3 D 3
OK
B1 B 2 B3 A1 A 2
J D I
JDI
D
IMMC3
DIMMA1
D
IMMA2
DIMMA3
DIMMB3
DIMMB2
DIMMB1
Rev. 1.01
D
IMMC
2
D
IMMC1
D
IMM
D
3
D
IMM
D2
D
IMM
D
1
DIMM C3
DIMM C2
DIMM C1
DIMM D3
DIMM D2
DIMM D1
DIMM A3
DIMM A2
DIMM A1
DIMM B3
DIMM B2
DIMM B1
PRESENT LEDs
Notes
: When installing a DIMM module, be sure to press the module straight down
into the slot until it is properly seated and its PRESENT LED (as shown above)
turns on.