Supero SUPERSERVER 1028U Series, Руководство пользователя

Страница: 63 / 120

Chapter 5: Advanced Serverboard Setup
5-17
Unit Identifier Buttons/UID LED
Indicators
A rear unit identifier button (JUIDB2)
is located next to the COM port. The
connection for the front UID button
is located on pin 13 of JF1. The rear
UID LED (LED1) is located next to the
rear UID button, and the front UID LED
connection is located on pin 7 of JF1.
When you press the rear UID button,
both front and rear UID LED indicators
will be turned on. Press the UID button
again to turn off the LEDs. The UID
indicators provide easy identification
of a system unit that may be in need
of service.
Note: UID can also be triggered via
IPMI. For more information on IPMI,
please refer to the IPMI User's Guide
posted on our website.
UID Button
Pin# Definition
1 Ground
2 Ground
3 Button In
4 Button In
UID LED
Status
Color/State Status
Blue: On Unit Identified
Universal Serial Bus (USB)
Two USB 3.0 ports (USB 0/1) are located on the rear I/O panel. A Type A USB con-
nector (USB 2), and a USB header with two USB connections (USB 3/4) provide
onboard three USB 3.0 connections for front access (cables not included). See the
tables below for pin definitions.
USB 3.0 Port (USB0/1, 2)
Pin Definitions
Pin# Definition Pin# Definition
1 +5V 5 +5V
2 USB_PN1 6 USB_PN0
3 USB_PP1 7 USB_PP0
4 Ground 8 Ground
USB 3.0 Header (USB 3/4)
Pin Definitions
Pin# Description Pin# Description
1 USB3.0_Front_VCC
2 USB3_RE_RXN6 19 USB3.0_Front_VCC
3 USB3_RE_RXP6 18 USB3_RE_RXN5
4 Ground 17 USB3_RE_RXP5
5 USB3_RE_TXN6 16 Ground
6 USB3_RE_TXP6 15 USB3_RE_TXN5
7 Ground 14 USB3_RE_TXP5
8 USB2_N8 13 Ground
9 USB2_P8 12 USB2_N9
10 Ground 11 USB2_P9