Supero SUPERSERVER 1028U Series, Руководство пользователя

Страница: 71 / 120

Chapter 6: Advanced Chassis Setup
6-1
Chapter 6
Advanced Chassis Setup
This chapter covers the steps required to install components and perform
maintenance on the SC119UAC2-R750 chassis. The only tool required is a Phillips
screwdriver.
Your system may require the installation of processors, memory, drives or
expansion cards. Other procedures presented in this chapter are for maintenance
or replacement.
Control Panel
SAS3/SATA Hot-Swap Drive Bays (10)
Two on the right can be configured for NVMe for some models
USB
Ports
(2)
6-1 Static-Sensitive Devices
Electrostatic Discharge (ESD) can damage electronic com ponents. To prevent
damage to any printed circuit boards (PCBs), it is important to handle them very
carefully.
The following measures are generally sufficient to protect your equipment from
ESD damage.
Precautions
•
Use a grounded wrist strap designed to prevent static discharge.
•
Touch a grounded metal object before removing any board from its antistatic bag.
•
Handle a board by its edges only; do not touch its components, peripheral chips,
memory modules or gold contacts.
Figure 6-1. Chassis Front and Rear Views
Power Supplies Rear I/O Ports
PCI Slots LAN Ports
(2 or 4)