Supero SUPERSERVER 1027R-WC1R, Руководство пользователя

Страница: 88 / 120

7-4
S
UPER
S
ERVER 1027R-WC1R/1027R-WC1RT User's Manual
Interrupt 19 Capture
Interrupt 19 is the software interrupt that handles the boot disk feature. When this
item is set to Enabled, the ROM BIOS of the host adaptors will "capture" Interrupt 19
at bootup and allow the drives that are attached to these host adaptors to function
as bootable disks. If this item is set to Disabled, the ROM BIOS of the host adap-
tors will not capture Interrupt 19, and the drives attached to these adaptors will not
function as bootable devices. The options are Enabled and Disabled.
Re-try Boot
If this item is enabled, the BIOS setup utility will automatically attempt to boot from
a boot device specifi ed by the user again after its initial boot failure. The default
setting is Disabled .
Power Confi guration
Watch Dog Function
If enabled, the Watch Dog timer will allow the system to reboot when it is inactive
for more than 5 minutes. The options are Enabled and Disabled.
Power Button Function
If this feature is set to Instant Off, the system will power off immediately as soon
as the user presses the power button. If this feature is set to 4 Seconds Override,
the system will power off when the user presses the power button for 4 seconds or
longer. The options are Instant Off and 4 Seconds Override.
Restore on AC Power Loss
Use this feature to set the power state after a power outage. Select Stay Off for the
system power to remain off after a power loss. Select Power-On for the system
power to be turned on after a power loss. Select Last State to allow the system
to resume its last state before a power loss. The options are Stay Off, Power On,
and Last State .
CPU Confi guration
This submenu displays the information of the CPU as detected by the BIOS. It also
allows the user to confi gure the CPU settings.

Socket 1 CPU Information/Socket 2 CPU Information
This submenu displays the following information regarding the CPUs installed
in Socket 1/ Socket 2.