Supero SUPERSERVER 1027R-WC1R, Руководство пользователя

Страница: 11 / 120

1-3
Chapter 1: Introduction
Rear I/O Ports
Ports on the I/O backplane include a VGA port, four USB 2.0 ports, two gigabit
Ethernet ports and one dedicated IPMI port. A UID (Unit Identifi er) button and LED
are also located beside the PCI-E slots.
1-3 Server Chassis Features
The SC116AC-R700WB is Supermicro's third-generation 1U chassis. The following
is a general outline of the main features of the SC116AC-R700WB chassis.
System Power
The SC116AC-R700WB features a 700W power supply composed of two separate
power modules to provide power redundancy. This power redundancy feature allows
you to replace a failed power supply module without shutting down the system.
Hard Drive Subsystem
The SC116AC-R700WB chassis was designed to support ten hot-swap SATA or
SAS hard drives.
Front Control Panel
The control panel on the SC116AC-R700WB provides important system monitoring
and control information. LEDs indicate power on, network activity, hard disk drive
activity and a Universal Information LED. Also present are a main power button and
a UID (Unit Identifi er) button.
Cooling System
The SC116AC-R700WB chassis has an innovative cooling design that features six
sets of 4-cm counter-rotating fans located in the middle section of the chassis. These
fans are 1U high and are powered by 4-pin connectors, with chassis fan speed
controlled by IPMI software. The power supply module also includes a cooling fan.