Supero SUPERSERVER 1027R-WC1R, Руководство пользователя

Страница: 66 / 120

5-18
S
UPER
S
ERVER 1027R-WC1R/1027R-WC1RT User's Manual
T-SGPIO Header
The SGPIO (Serial General Purpose
Input/Output) header is used to com-
municate with the enclosure manage-
ment chip on the backplane. See the
table on the right for pin defi nitions.
T-SGPIO Header
Pin Defi nitions
Pin# Defi nition Pin Defi nition
1 NC 2 NC
3 Ground 4 DATA Out
5 Load 6 Ground
7 Clock 8 NC
Power LED/Speaker
On the JD1 header, pins 1-3 are for
a power LED and pins 4-7 are for the
speaker. Close pins 4-7 with a jumper
to use an external speaker. If you wish
to use the onboard speaker, please
close pins 6-7. See the table on the
right for speaker pin defi nitions.
Speaker Connector
Pin Settings
Pin Setting Defi nition
Pins 4-7 External Speaker
Pins 6-7 Internal Speaker
PWR LED Connector
Pin Defi nitions
Pin# Defi nition
1 Anode (+)
2 Cathode (-)
3 NA
Overheat/Fan Fail LED
The JOH1 header is used to connect
an LED indicator to provide warnings
of chassis overheating and fan failure.
This LED will blink when a fan failure
occurs. Refer to the table on the right
for pin defi nitions.
OH/Fan Fail LED
Status
State Message
Solid Overheat
Blinking Fan Fail
Overheat LED
Pin Defi nitions
Pin# Defi nition
1 VDC
2 OH Active
Serial Port Pin Defi nitions
(COM1/COM2)
Pin # Defi nition Pin # Defi nition
1 DCD 6 DSR
2 RXD 7 RTS
3 TXD 8 CTS
4 DTR 9 RI
5 Ground 10 NC
Serial Ports
One serial port is located next to the
VGA port. COM1 provides support for
a serial connection. See the table on
the right for pin defi nitions.