Supero SUPER P4SC8, Руководство пользователя

Страница: 24 / 96

2-4
S
UPER P4SC8/P4SCi User's Manual
2-4 Installing DDR Memory
CAUTION
Exercise extreme care when installing or removing memory
modules to prevent any possible damage.
Memory Module Installation (See Figure 2-2)
1. Insert each DDR memory module vertically into its slot. Pay attention to
the notch along the bottom of the module to prevent inserting the mod-
ule incorrectly. (See support information and the note below.)
2. Gently press down on the memory module until it snaps into place.
2-3 Mounting the Motherboard in the Chassis
All motherboards have standard mounting holes to fit different types of
chassis. Make sure the location of all the mounting holes for both the
motherboard and the chassis match. Although a chassis may have both
plastic and metal mounting fasteners, metal ones are highly recommended
because they ground the motherboard to the chassis. Make sure the metal
standoffs click in or are screwed in tightly. Then use a screwdriver to
secure the motherboard onto the motherboard tray.
Lever
(*With Processor Installed)
Figure 2-1. 478-pin mPGA Socket: Empty and with Processor Installed
Pin 1
Support
The P4SC8/P4SCi supports Dual channel, ECC or non-ECC, unbuffered
DDR-400/333/266 SDRAM. (Populate DIMM0A,DIMM1A and/or DIMM0B,
DIMM1B with memory modules of the same size/same type will result in
the dual channel, two-way interleaved memory which is faster than the
single channel memory.