Supero SUPER P4SC8, Руководство пользователя

Страница: 25 / 96

Chapter 2: Installation
2-5
To Install:
Insert module
vertically and
press down
until it snaps
into place.
Pay attention
to the notch.
Figure 2-2. Side and Top Views of DDR Module Installation into Slot
To Remove:
Use your thumbs
gently to push
each release tab
outward to
release the DIMM
from the slot.
Memory Speeds
Host Clock
(MHz) FSB (MHz) DRAM DATA
RATE (MT/s) Shown during
POST
100 400 266 DDR266
333 DDR266
400 DDR266
133 533 266 DDR266
333 DDR333
400 DDR333
200 800 266 DDR266
333 DDR320
(*Note)
400 DDR400
(*Note: The BIOS will display 320 due to the limitation of Intel’s chipset).
(*Note: The Intel E7210 ((Canterwood ES)) chip supports unbuffered,
non-ECC or ECC memory. If ECC memory is installed, the ECC bits need
to be initialized via BIOS before normal operation. For a 4 GB-Memory and
2.4-GHz P4 system, it will take about 65 seconds for all the ECC bits to
be initialized before any video displays. Since ECC initialization takes time,
the Watch Dog Timer Select needs to be set to a time longer than what
the ECC initialization will take.)