Supero Super 370SCD, Руководство пользователя и BIOS

Страница: 67 / 94

Chapter 4: BIOS
4-11
BIOS
Memory ECC Mode
The settings for this option are
Disabled, EC Mode, S/W ECC and H/W
ECC
. Use this option to enable or disable the use of EC or ECC memory
correction schemes.
CPU Clock Frequency
This option allows you to increase the FSB speed over the normal 100
and 133 MHz settings controlled by JP11. The settings for this option are
Auto, 105, 114, 120, 124, 128.5 and 133.9 MHz with JP12 set to 100 MHz
or Auto and Auto , 133.3, 138, 143, 148, 150, 152.5, 155 and 160 MHz
when JP12 is set to 133 MHz or Auto. (The Auto setting on JP12 will
determine which front side bus speed will be used.)
PCI Clock Off
The settings for this option are Enabled and Disabled .
Power Management
NOTE: APM is automatically installed. If using ACPI, changes to the
following settings up to and including LAN Wake-Up will have no affect.
If you prefer to use ACPI, refer to the instructions on initializing ACPI on
page 1-22.
Standby Time Out
This option specifies the length of a period of system inactivity while in
the full power-on state. When this length of time expires, the computer
enters a standby power state. The settings are Disabled, 1Min, 5Min
and 10Min .
Suspend Power Saving Type
The settings for this option are S1 and C2 . S1 is a normal suspend
state, in which no system (CPU or chipset) context is lost. C2 is a low
power state. In this state, the system cache is maintained.
Suspend Time Out
This option specifies the length of a period of system inactivity while in
the standby state. When this length of time expires, the computer enters
a suspend power state. The settings are Disabled, 1Min, 5Min and
10Min .
Power Button Mode
This option specifies how the power button mounted externally on the
computer chassis is used. The settings are:
Standby
and
On/Off
. When