Supero Super 370SCD, Руководство пользователя и BIOS

Страница: 46 / 94

2-12
S
UPER PIIISCA/PIIISCD/PIIISCE/370SCD User's Manual
Installation
Keyboard Wake-Up
The JPWAKE jumper is used in
c o n j u n c t i o n w i t h t h e K e y b o a r d
Wake-Up function in BIOS (page
4-20). Enable both the jumper and
the BIOS setting to allow the sys-
tem to be woken up by depressing
a key on the keyboard. See Table
2-19 for jumper settings. Your
p o w e r s u p p l y m u s t m e e t A T X
specification 2.01 or higher and
supply 720 mA of standby power
to use this feature.
J u m p e r
Position
1-2
2-3
Definition
D i s a b l e d
E n a b l e d
Table 2-19
Keyboard Wake-Up
Jumper Settings
(JPWAKE)
AC'97 Enable/Disable
AC'97 brings high quality audio to
PCs. When enabled with JP28, au-
dio is processed onboard and the
AMR slot will support modems only.
The disabled setting should be se-
lected when you wish to use an add-
on card for audio either in the AMR
or a PCI slot. See Table 2-18 for
jumper settings.
J u m p e r
Position
1-2
2-3
Definition
E n a b l e d
D i s a b l e d
Table 2-18
AC'97 Enable/Disable
Jumper Settings (JP28)
CMOS Clear
Refer to Table 2-17 for the jumper
settings to clear CMOS. Always
remove the AC power cord from
the system before clearing CMOS.
For an ATX power supply, you
m u s t c o m p l e t e l y s h u t d o w n
t h e s y s t e m , r e m o v e t h e A C
power cord and then use JBT1
to clear CMOS. Replace JBT1
b a c k t o t h e p i n 1 - 2 p o s i t i o n
b e f o r e p o w e r i n g u p t h e s y s -
t e m a g a i n . D o n o t u s e t h e
P W _ O N c o n n e c t o r t o c l e a r
CMOS.
Table 2-17
CMOS Clear Jumper Settings
(JBT1)
J u m p e r
Position
1-2
2-3
Definition
N o r m a l
C M O S C l e a r
Position
1-2
Position
2-3
Normal
CMOS
Clear