Supero Super 370SCD, Руководство пользователя и BIOS

Страница: 32 / 94

S
UPER PIIISCA/PIIISCD/PIIISCE/370SCD User's Manual
1-24
Introduction
External Modem Ring-On
Wake-up events can be triggered by the external modem ringing when the
system is in the SoftOff state. Note that external modem ring-on can only be
used with an ATX 2.01 (or above) compliant power supply.
Wake-On-LAN (WOL)
Wake-On-LAN is defined as the ability of a management application to re-
motely power up a computer that is powered off. Remote PC setup, up-
dates and asset tracking can occur after hours and on weekends so that
daily LAN traffic is kept to a minimum and users are not interrupted.
The motherboards have a 3-pin header (WOL) to connect to the 3-pin
header on a Network Interface Card (NIC) that has WOL capability. Wake-
On-LAN must be enabled in BIOS (page 4-15). Note that Wake-On-Lan can
only be used with an ATX 2.01 (or above) compliant power supply.
1-5 Power Supply
As with all computer products, a stable power source is necessary for
proper and reliable operation. It is even more important for processors that
have high CPU clock rates of 300 MHz and above.
The SUPER PIIISCA/PIIISCD/PIIISCE/370SCD accommodates ATX power sup-
plies. Although most power supplies generally meet the specifications re-
quired by the CPU, some are inadequate.
It is strongly recommended that you use a high quality power supply that
meets ATX power supply Specification 2.01 or above. Additionally, in areas
where noisy power transmission is present, you may choose to install a
line filter to shield the computer from noise. It is recommended that you also
install a power surge protector to help avoid problems caused by power
surges.
Note: To support the keyboard wake-up function, your power supply must
be ATX 2.01 or higher and must provide a minimum standby voltage of 720
mA.