Supero SC847 Series, Руководство пользователя

Страница: 44 / 188

SC847 Chassis Manual
5-6
5-5 Installing Optional Fixed Hard Drives
The SC847 chassis includes brackets for installing either one 3.5" fixed hard drive,
or two 2.5" fixed hard drives within the chassis. Each chassis can accommodate
up to two internal drive brackets supporting up to two 3.5" hard drives or up to four
2.5" hard drives. The bracket part number is MCP-220-84701-0N.
Accessing Fixed HDD Locations
1. Power down the system as described in Section 5-2 and remove the cover.
2. On the outside of the chassis, remove the two screws securing the mother-
board tray to the chassis.
3. On the inside of the chassis, find the spring-loaded pin that holds the mother -
board tray in the chassis. When looking from the front of the chassis over the
fans, the release pin is on the left side and inside the motherboard tray.
4. Pull on the spring-loaded release pin, and slide the motherboard tray to the
rear of the chassis, revealing the HDD mounting location on the floor of the
chassis.
1
4
1
2
Fixed HDD
Mounting
Location
Figure 5-7. Sliding the Motherboard Tray
Release Pin
(on the inside of
motherboard tray)
1
3
Screw
(on the outside
of chassis)
Screw
1
2
Motherboard
Tray