background image

4-2

H8DA6+/I+(-F) Serverboard User’s Manual

4-2 Main 

Menu

When you fi rst enter AMI BIOS Setup Utility, you will see the Main Menu screen.

You can always return to the Main Menu by selecting the

  Main 

tab on the top of 

the screen with the arrow keys.

The Main Menu screen provides you with a system overview, which includes the 

version, built date and ID of the AMIBIOS, the type, speed and number of the 

processors in the system and the amount of memory installed in the system.

System Time/System Date 

You can edit this fi eld to change the system time and date. Highlight 

System Time 

or 

System Date 

using the <Arrow> keys. Enter new values through the keyboard. 

Press the <Tab> key or the <Arrow> keys to move between fi elds. The date must 

be entered in DAY/MM/DD/YYYY format. The time is entered in HH:MM:SS format.  

Please note that time is in a 24-hour format. For example, 5:30 A.M. appears as 

05:30:00 and 5:30 P.M. as 17:30:00.

4-3  Advanced Settings Menu

 Boot Features

Quick Boot

If Enabled, this option will skip certain tests during POST to reduce the time 

needed for the system to boot up. The options are 

Enabled

 and Disabled.

Quiet Boot

If Disabled, normal POST messages will be displayed on boot-up. If 

Enabled

this display the OEM logo instead of POST messages.

Add On ROM Display Mode

This option sets the display mode for Option ROM. The options are 

Force BIOS 

or Keep Current.

Bootup Num Lock

This option selects the power-on state for the NUM lock to either 

On

 or Off.

PS/2 Mouse Support

Use this option to select support for the PS/2 mouse. Options are Disabled, 

Enabled or 

Auto

.

Содержание H8DA6+













































































Отзывы: