H8DA6+/I+(-F) Serverboard User's Manual
2-6
2-5 PCI Expansion Cards
A riser card is used to support one standard size (full height full length) PCI
expansion card.
Installing a PCI Expansion Card
Confi rm that you have the correct riser card for your chassis model and the
1.
add-on card includes a standard bracket.
Remove the chassis cover.
2.
Install the riser card by sliding card into the appropriate riser card in the
3.
motherboard.
Choose the PCI slot shield in which to place the add-on card.
4.
In that slot, open the PCI slot shield lever and slide the shield sideways.
5.
From inside the chassis, remove the PCI slot shield.
6.
Slide the add-on card into the riser card and attach the add-on card bracket
7.
in place of the PCI slot shield.
Secure the add-on card by closing the PCI slot shield lever.
8.
Connect cables to the add-on card as necessary.
9.
Figure 2-1. Side and Top Views of DDR Installation
To Install:
Insert module vertically
and press down until it
snaps into place. The
release tabs should
close - if they do not
you should close them
yourself.
To Remove:
Use your thumbs to
gently push each re-
lease tab outward to
release the DIMM from
the slot.
Note: Notch
should align
with its
receptive point
on the slot
Notch
Notch
Release
Tab
Release
Tab
Note the notch in the slot and on the bottom of the DIMM.
These prevent the DIMM from being installed incorrectly.
