H8DA6+/I+(-F) Serverboard User's Manual
2-2
!
2-2 Processor and Heatsink Installation
Exercise extreme caution when handling and installing the processor.
Always connect the power cord last and always remove it before adding,
removing or changing any hardware components.
Installation Procedure
Follow the procedures as listed below to install the serverboard into a chassis.
Install the processor(s) and the heatsink(s).
1.
Install the serverboard in the chassis.
2.
Install the memory and add-on cards.
3.
Finally, connect the cables and install the drivers.
4.
Installing the Processors
Begin by removing the cover
1.
plate that protects the CPU. Lift
the lever on the CPU socket
until it points straight up. With
the lever raised, lift open the
silver CPU retention plate.
Triangles
Use your thumb and your index
2.
fi nger to hold the CPU. Locate
and align pin 1 of the CPU
socket with pin 1 of the CPU.
Both are marked with a triangle.
