Supero C2SBM-Q, Руководство пользователя

Страница: 57 / 95

Chapter 4: BIOS
4-5

IDE Channel 0 Master/Slave/SATA Port2/SATA Port3/Ext. Primary
Master/Slave
These settings allow the user to set the parameters of slots indicated above. Hit
<Enter> to activate the following sub-menu screen for detailed options of these
items. Set the correct configurations accordingly. The items included in the sub-
menu are the following:
Type
Use this feature to select the type of storage or ROM drive. Select Auto to allow
the BIOS to automatically determine the drive's type/capacity (number of heads,
etc.). Select User to manually enter the parameters for the storage device in-
stalled on this particular port. For hard drives, enter a number between 1 to 39
to select a pre-determined HDD type from the Drive Table. Select CDROM if a
CDROM drive is installed. Select ATAPI if a removable disk drive is installed.
Note:
Select User for any device or legacy device that is not supported or auto-
matically detected under Auto. This enables you to manually enter parameters
for devices that are not otherwise available in the BIOS' drive table.
CHS Format
The following items will be displayed by the BIOS:
TYPE:
This item displays the type of IDE or SATA Device.